A Tea between friends :-) How was Your Day

nilrog · Post by **nilrog** » March 11th, 2016, 5:24 pm

I would be interested in a "higher" temp solution for the UMO+ also. But not in the nearest future.

martin-bienz · Post by **martin-bienz** » March 11th, 2016, 6:50 pm

I would also purchase an upgraded coupler that could print 260 reliably... no brainer. NinjaFlex, xt, others. It is a bit like with Anders nozzle in my case. Just switching filaments without replacing anything or worry about temperatures beeing to high...

Post by **Neotko** » March 11th, 2016, 7:28 pm

Swordriff should register on the forum and give us his input on availability and blingblingcost. Maybe this will help him put the product with a few units on his shop.

martin-bienz · Post by **martin-bienz** » March 12th, 2016, 1:21 am

An unteresting published study about 3d printers / filaments particle emissions and potential health implications:
https://www.lulzbot.com/learn/in-the-ne ... d-printers

Post by **reibuehl** » March 12th, 2016, 1:51 am

Neotko wrote:Swordriff should register on the forum and give us his input on availability and blingblingcost. Maybe this will help him put the product with a few units on his shop.

I meet him this week and strongly encouraged him to join here

Swordriff · Post by **Swordriff** » March 12th, 2016, 2:37 am

Hi All!

Yes, after some beers (cheers!) I was talked into joining the forum too, guess I am a slow starter!
I will be providing high temp teflons for UMO shortly, just waiting for the material from the USA.
The peek is tough to replace with a better one, the material alone would cost 50-100 USD....
grr..

Post by **Blizz** » March 12th, 2016, 2:51 am

Welcome Swordriff. Nice to see you here

Titus · Post by **Titus** » March 12th, 2016, 6:56 am

Swordriff! *waves*. Good to have you here! Curious to see your work.

Izzy · Post by **Izzy** » March 12th, 2016, 8:27 am

Ye, Swordriff, another welcome name of the forum

Post by **LePaul** » March 12th, 2016, 11:33 am

Welcome to the island of misfits !

ivan.akapulko · Post by **ivan.akapulko** » March 12th, 2016, 12:28 pm

LePaul wrote:Welcome to the island of misfits !

4toys.jpg

Without the bear and the ducky, this picture looks unfinished!

Amedee · Post by **Amedee** » March 13th, 2016, 5:17 pm

Made some tests today...

... As a side effect a now have an additional mini-Bommeltje!

Printed in nGen -- it is not really visible on the video, but the details are very nice

Post by **LePaul** » March 13th, 2016, 6:29 pm

Nice! Looks great

ivan.akapulko · Post by **ivan.akapulko** » March 14th, 2016, 12:48 am

Nice 8-bit tune. Who is author?

Amedee · Post by **Amedee** » March 14th, 2016, 3:43 am

ivan.akapulko wrote:Nice 8-bit tune. Who is author?

From here

3D Printing Forum

A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day

Re: A Tea between friends :-) How was Your Day